HOW TO APPLY STICKER

UNIVERSAL INSTALLATION INSTRUCTIONS

 

  1. Rub the sticker to make sure that transfer tape is properly adhered to the artwork. 

  2. Prepare the desired area to where the sticker to be applied by making it clean and dry.

  3. Remove the white backing paper slowly and make sure the artwork stays adhered to the clear application tape.

  4. Carefully position the sticker to the desired area.

  5. Rub the sticker artwork to eliminate any air bubbles, normally air bubbles can be worked to edge of the sticker .You can use something like a credit card to make sure the sticker completely adhered to the surface.

  6. Slowly remove the clear application tape. Make sure to peel away the tape parallel to the surface.

  7. Check for air bubbles.  pin hole will do the job removing air out and become virtually invisible.

 

WINDSHIELD BANNER AND SUN STRIP VISOR DECAL INSTALLATION INSTRUCTIONS VIDEOS

 

TOOLS REQUIRED:

Spray bottle with dish soap & water mixture

Plastic Squeegee/Business card or Credit card 

Cutter blade/Knife

PREPARATION:

Clean window well to ensure good adhesion of the Decal.Fill a spray bottle with a mixture of water and one drop of dish soap.You can use water only if you prefer. Be sure to install decal out of direct sunlight.

 

DRY INSTALLATION METHOD:

 

 

WET INSTALLATION METHOD:

We recommend to use this application method for decals with white paper application tape only as they were designed for this purpose.

 

 

SUN STRIP VISOR BANNER INSTALLATION METHOD:

Applied directly without transfer tape